HT1624TK Hydraulic Track Trencher
The Red Roo HT1624TK trencher is powered by a 16hp (12kw) V Twin OHV Briggs and Stratton Vanguard
Key Features
- No Belts - No Gears - No Chains (With The Exception Of The Trenching Chain)
- Lower Centre Of Gravity
- Out board Support Bearing - Standard
The Red Roo HT1624TK trencher is powered by a 16hp (12kw) V Twin OHV Briggs & Stratton Vanguard.
The HT1624TK has a forward ground speed of 55 metres per minute and a reverse ground speed of 27 metres per minute.
The maximum trenching depth is 600mm with a width of 100 mm.
This unit has a solid footprint, allowing access to very difficult environmental conditions.
DEMONSTRATION TRACK TRENCHER
IRRIGATION TRENCHING DEMONSTRATION
Engine | |
|---|---|
| Engine Type | 16.0hp (12kw) V Twin OHV Briggs & Stratton Vanguard Manual Start |
| Engine Drive | Direct Hydraulic Drive To Head Shaft |
General | |
| Transport Length | 2108mm-Front Wheel to Handlebar |
| Transport Length | 2235mm - Boom to Handlebar |
| Transport Width | 889mm |
| Transport Height | 1168mm |
| Weight | 450 kg |
| Trencher Dimension | 483mm Centre to Outside Left |
| Trencher Dimension | 381mm- Centre to Outside Right |
| Wheel Base | 889mm |
| Wheel Base: 889mm | 203mm- Head Shaft Height Digging Chain |
| Trenching Depth | 610mm Maximum |
| Trenching Width | 150mm Maximum |
| Boom Travel - Up | 60° |
| Boom Travel - Down | 60° |
Options | |
| Donaldson Cyclopac™ Air Filtration System | |
| Lifting Hook | |
Chain | |
| 610mm x 100mm 13 Station Cup Chain (Optional) | |
| 610mm x 100mm 26 Station Cup Chain (Standard) | |
| 610mm x 100mm 26 Station Frost Rock Bullet Chain (Optional) | |
Operation | |
| Ground Speed -Forward | 55 metres per minute |
Features | |
|---|---|
| No Belts - No Gears - No Chains (With The Exception Of The Trenching Chain) | |
| Lower Centre Of Gravity | |
| Out board Support Bearing - Standard | |
| Safety Clutch Stops Wheels & Chain Immediately | |
| Hydraulic Chain Reverse To Dislodge Rocks Or Debris | |
| Finer Degree Of Control For Trenching Ground-Speed | |
Warranty | |
|---|---|
| 12 Months On Machine & 2 Years On Engine As Per Specification | |
| 90 Days In Commercial Applications / 90 Days In Hire & Rental | |
Shipping details for the HT 1624 Mini Track Trencher are shown below:
HT1624 Mini Track Trencher (Shipping Dimensions Assembled Banded To The Pallet)
Width: 945 mm
Length: 2500mm
Height: 1400mm
Weight: 515kgs (Shipping Weight)
RELATED PRODUCTS
The Red Roo HT712 mini trencher is powered by a 6.5HP(4.9KW) Honda(Genuine) GX200 engine.
The Red Roo 2336 Track Trencher is powered by an 23hp Honda Engine. This machine is fully hydraulic and can exceed a metre in cutting depth.
The Red Roo 1624 STK Mini Track Trencher has may of the same key features as our larger track trenchers.
The Red Roo HT912 is an all hydraulic compact trencher that is perfect for the installation of irrigation, sprinkler and electrical systems.